Shop by Product Type
Click Inquire on any category to send us a quick request and we'll get back to you with pricing and availability.
Paint
Basecoats, solid colors, and OEM-matched paint for collision repairs. Available in waterborne and solvent-based formulas for every spray system.
Clear Coat
High-gloss clear coats that protect your finish and deliver showroom shine. Choose from standard, high-build, and fast-dry formulas.
Primer
Epoxy, urethane, and self-etching primers for superior adhesion and corrosion resistance on bare metal, plastic, and repaired substrates.
Thinners & Reducers
Slow, medium, and fast reducers to dial in viscosity and dry time for any shop environment. Compatible with all major paint systems.
Additives & Cleaners
Wax and grease removers, fisheye eliminators, flex additives, and hardeners to prep surfaces and perfect your paint chemistry.
Body Repair & Fillers
Premium body filler, spot putty, and glazing compound for achieving a perfectly smooth substrate before primer and paint.
Adhesives & Sealants
Panel bond adhesive, seam sealer, and urethane windshield adhesive for structural repairs and waterproof joints.
Sandpaper & Abrasives
Dry and wet-sand abrasives from 40 to 3000 grit for every stage - stripping, block sanding, scuffing, and final color sanding.
Masking Products
Fine-line masking tape, automotive masking paper, plastic sheeting, and pre-taped covers to protect every surface during paint.
Spray Products
Aerosol sprays for touch-ups, underbody protection, and quick repairs - ready-to-spray with no gun required.
Toners
Intermix toners for custom color blending and OEM color matching. Compatible with waterborne and solvent mixing systems.
Undercoating
Rubberized and asphalt-based undercoating for rust prevention, sound deadening, and underbody protection on any vehicle.
Detail Products
Compound, polish, wax, clay bars, and interior dressings to finish and protect repaired vehicles before delivery.
Tools & Equipment
Spray guns, mixing cups, stir sticks, strainers, tack cloths, and safety gear to keep your shop equipped and productive.
Supply & Misc.
Shop consumables and specialty products - everything from mixing sticks and gloves to paint suits and respirator cartridges.
The 6-Step Refinishing Process
Use this as a product checklist. We stock everything for every step.
Wash & Strip
Wash the panel and strip old paint or rust with 40–80 grit abrasive. Use a wax & grease remover before any sanding.
Wax & Grease Remover · 40–80 Grit DiscFill & Block
Apply body filler to low spots, block-sand with 80–180 grit, then finish with spot putty and 220–320 grit for a smooth substrate.
Body Filler · Spot Putty · 80–320 GritPrime
Spray epoxy primer over bare metal for corrosion protection, then top with urethane high-build primer. Block-sand to 400–600 grit.
Epoxy Primer · Urethane High-Build · 400–600 GritSeal & Basecoat
Apply a sealer coat for uniform color holdout, then spray your OEM-matched basecoat. Allow flash time between coats.
Sealer · Basecoat Paint · ReducerClear Coat
Apply 2–3 coats of clear over the basecoat while it's still tacky. Wet-sand with 1500–2000 grit if needed.
Clear Coat · 1500–2000 Grit · HardenerDetail & Deliver
Compound and polish to remove sanding marks, then finish with wax for a showroom-quality result.
Compound · Polish · Wax